2026 Guide Enel X JuiceBox 40 and 48 Amp

JuiceBox EV Charger Installation 2026: Enel X JuiceBox 40 Complete Setup Guide

The JuiceBox 40 costs $619 and delivers 9.6 kW at 40 amps on a 240V circuit. The JuiceNet app provides WiFi scheduling, energy monitoring, and utility time-of-use rate optimization. The 25-foot J1772 cable reaches most home parking configurations. Professional installation adds $1,000 to $1,800. After the federal 30% credit your net cost is typically $619 to $1,419.

$619
JuiceBox 40 hardware
9.6 kW
Output power at 40A
25 ft
J1772 cable length
JuiceNet
WiFi app with TOU scheduling

Why the JuiceBox Has a Loyal Following Among EV Owners

The JuiceBox has been one of the most recognized home EV charger brands in America since Enel X Way brought it to market. The JuiceBox 40 delivers 9.6 kW at 40 amps and the JuiceBox 48 steps up to 11.5 kW at 48 amps for faster charging. Both versions use the JuiceNet platform, a mature cloud-based management system that allows remote monitoring, charging schedules, utility demand response enrollment, and detailed energy cost tracking.

The JuiceNet platform is particularly valuable for EV owners enrolled in utility time-of-use rate programs. When your utility charges less for electricity overnight, JuiceNet can automatically schedule charging to begin at the start of the off-peak window and complete before peak rates resume in the morning. For MidAmerican Energy customers in Des Moines charging at $0.06 per kWh overnight or NV Energy customers in Las Vegas with similar TOU programs, JuiceNet scheduling ensures every kilowatt is charged at the cheapest possible rate without the owner having to manually configure the vehicle's charging schedule.

JuiceNet TOU Scheduling How Smart Charging Saves Money Every Night

JuiceNet automatically starts and stops charging based on your utility rate schedule

📱
You set your utility TOU schedule once in JuiceNet app
Enter on-peak and off-peak times from your utility bill. JuiceNet remembers forever.
🔌
Plug in when you get home JuiceBox waits
The charger pauses automatically until your off-peak window begins. No manual action needed.
âš¡
Charging starts automatically at off-peak rate
JuiceBox starts charging at the cheapest rate. Completes before on-peak hours begin in the morning.
💰
You wake up to a full battery at the lowest possible cost
Savings of $200 to $400 per year for typical EV owner on TOU plan versus standard rate charging.

JuiceBox 40 vs JuiceBox 48 Which to Choose?

The JuiceBox 40 costs $619 and delivers 9.6 kW at 40 amps. The JuiceBox 48 costs approximately $719 and delivers 11.5 kW at 48 amps. The 40-amp version plugs into a NEMA 14-50 outlet if you have one installed, which can significantly reduce installation cost. The 48-amp version requires a hardwired connection to a 60-amp dedicated circuit for full output. For most EV owners driving 30 to 60 miles per day the JuiceBox 40 is completely adequate since even 30 miles per hour of charging means a typical overnight session of 8 hours adds 240 miles of range, far more than any daily commute requires.

Ready to get your EV charger installed? Free quotes from certified local electricians. Federal 30% credit expires June 30, 2026.

Get Free Quotes
The JuiceBox 40 costs $619 and the JuiceBox 48 costs approximately $719. Professional installation adds $1,000 to $1,800 for the dedicated 240V circuit, conduit, breaker, permit, and inspection. After the federal 30 percent tax credit of up to $1,000 most homeowners net $619 to $1,319 out of pocket for the JuiceBox 40. If your home already has a NEMA 14-50 outlet the JuiceBox 40 plugs in with minimal additional work reducing total installation cost significantly.
JuiceNet is the Enel X Way cloud platform that powers JuiceBox smart features. Through the JuiceNet app on iPhone or Android you can set charging schedules based on your utility time-of-use rate, monitor real-time energy consumption and cost, receive notifications when charging starts, stops, or encounters a problem, adjust the charger's maximum amperage output, enroll in utility demand response programs, and share charge history for expense reporting. JuiceNet connects via WiFi and updates automatically. The platform has been in service since 2012 making it one of the most mature home EV charging management systems available.
Yes. The JuiceBox uses the standard J1772 connector which is compatible with all non-Tesla EVs directly. Tesla vehicles including Model S, Model 3, Model X, Model Y, Cybertruck, and Semi all have a NACS port. Tesla provides a J1772 to NACS adapter with every vehicle, allowing JuiceBox charging without any additional purchase. Simply plug the J1772 to NACS adapter into your Tesla and then connect the JuiceBox cable as you would with any other vehicle. The adapter is typically stored in the vehicle's charging port compartment.

Get Your EV Charger Installed This Week

Certified electricians nationwide. Free quotes in 24 hours. Federal 30% credit available.

Get Free Quotes